-
Event Viewer (Optional)
The Event Viewer allows for a visual display of the la st 4 Events that have occurred on the M60 Alarm Dialler.
Events are either a dial-out due to an active alarm, or a call-back to cancel the M60 from continuing to dial-out.
Each Event will use a single line on the display.
Dial-out Event
A Dial-out Event will occur whenever the M60 has completed the dialling of a telephone number.
The Dial-out Event will always show the time followed by the Date and Month and then the first two active alarms separated by a comma. The last character on the line informs the user if there were no other active alarms or there are more active alarms than displayed.
Call-back/Cancellation Event
A Call-back Event will occur whenever the M60 has been called back to cancel further calls being made.
The event viewer will always show the last 4 events in sequence, running from oldest to newest.
Upgrade options include holding a higher number of events and more detail.
The M60 Alarm Auto Dialer standard features include;
- 4, 8, 16, 32 & 56 individual alarm inputs / channels.
- Individual Speech Messages for each input.
- Individual SMS Messages for each input.
- PSTN & GSM Options.
- Internal Mains Failure Alarm Sensor.
- 24+ Hour Internal Battery Backup.
- Fully Menu and Keypad Driven.
- IP56 Industrial Rated Enclosure.
Because the M60 is built by us in the UK if there are any special features you require for your project we can normally create them for you.
The above is only a small subset of the available features on the M60 Alarm Auto Dialer; for a complete list visit the Standard Features and Optional Features pages or contact us for a quote.
Written by M60 GSM Alarm Dialer
-
Remote Equipment Failure Monitoring
 Remote Site Having Equipment / machinery / processes / livestock in remote and or unmanned locations means you need to have an effective method of monitoring them for problems or failures. But like the preverbal tree in the forest having an expensive alarm system and sensors is not much use if there is no one around to hear it.
That is where our M30 comes in, it can safety and securely send alarm messages in the form of voice, SMS or data to the correct on call personnel, instantly informing them of the problems with the remote equipment, allowing them to quickly respond.
The M30 can use both the standard PSTN land line phone network and GSM mobile/cell network to send alarms. It can also be setup to monitor the connected land line and automatically switch to the GSM mobile/cell phone network if the line fails.
You can also interrogate the M30 at any time allowing you to check the current status of any alarms.
The M30 is currently used around the world in a multitude of situations from Power Stations in England, desalination plants in Florida, Railways in Singapore, Live Stock in Wales and Pharmaceuticals in Scotland.
Below are some of the features available on the M30;
- 4,8,16 and 56 individual alarm inputs / channels.
- Individual user recordable speech and or SMS messages for each input.
- Voice, SMS & Pager alarm messages.
- PSTN and or GSM phone network connection.
- Remote 247 Interrogation from any phone.
- Integrated Mains Failure detection.
- 24 Hour + battery Backup.
- Fully Menu and Keypad driven with a backlit LCD display.
- IP56 Industrial enclosure.
Because the M30 is designed and built by ourselves in the UK if there is a special function you need for your application then we will normally be happy to create it for you.
The above list is only a small selection of the M30 features, for more comprehensive information please contact us or visit the standard or optional features pages.
Written by M60 GSM Alarm Dialer
-
Remote Site Alarm System
Our UK built and designed M30 Alarm System was created specifically to protect remote and unmanned sites and equipment.
Remote Site As the M30 is purpose built for remote and harsh environments it comes with all the types of features you might expect including; 4,8,16 or 56 dedicated alarm inputs, voice and SMS alarm messages, integrated 24/48 hour battery backup, low battery alarm, basic surge protection, an IP56 Enclosure rating and a user friendly LCD and keypad.
Even if your remote site does not have any electricity or phone lines or if they are intermittent you can still use the M30 as it can be run off a 12vdc supply and you can use the GSM mobile/phone lines to make and receive alarm messages.
The M30 is used around the world by a variety of different businesses and in a multitude of applications including; Railways in Hong Kong, Gas & Oil in Scotland and the Fareo islands, remote power generation on dams and landfills, remote and unmanned livestock farms.
Below are some of the features available on the M30;
- 4,8,16 and 56 individual inputs / channels.
 Remote Alarm System
- Individual user recordable speech and or SMS messages for each input.
- Voice, SMS, Pager alarm messages.
- PSTN and or GSM phone network connection.
- Remote 247 Interrogation.
- Integrated Mains Failure detection.
- 24 Hour plus battery Backup.
- Fully Menu and Keypad driven
- IP56 Industrial enclosure.
Because the M30 is designed and built by ourselves in the UK if there is a special function you need for your application or site then please just ask as we will normally be able to create it for you.
The above list is only a small selection of the M30 features, for more comprehensive information or pricing please Contact Us or visit the Standard or Optional Features pages.
Written by M60 GSM Alarm Dialer
-
M30 Alarm Monitoring System
The M30 Alarm Monitoring System is purposely designed to monitor your alarms and equipment 24 hours a day, 7 days a week 365 days a year.
When the M30 detects an alarm activation or a problem with your equipment it will instantly communicate this to the correct on call personal via voice, SMS or data over a std land line or the mobile/cell phone networks. The M30 will then continue to send messages until one of the personal acknowledges the problem and cancels any further messages, this prevents the common problem of someone not hearing their phone or falling over in bed and falling back to sleep.
 Alarm Monitoring System You can connect up to 56 individual items to the M30, each with their own individual user recordable speech or SMS message. It also has its own integrated battery backup, Mains Failure detection and is designed for use in commercial/industrial situations.
The M30 can come with backup protection for your landline so if your phone line has been tampered with or fails the M30 will automatically switch to the GSM networks to make sure you always get your alarm message.
The M30 can also be used to trigger onsite audible alarms or turn on/off equipment via its remote switching capability.
Below are some of the features available on the M30;
- 4,8,16 and 56 individual inputs/ channels.
- Individual user recordable speech and or SMS messages for each input.
- Voice, SMS, Pager alarm messages
- PSTN and or GSM phone network connection.
- Remote 247 Interrogation.
- Integrated Mains Failure detection.
- 24 Hour battery Backup
- Fully Menu and Keypad driven
- IP56 Industrial enclosure.
Because the M30 is designed and built by ourselves in the UK if there is a special function you need for your application then we will normally be happy to create it for you.
The above list is only a small selection of the M30 features, for more comprehensive information please contact us or visit the standard or optional features pages.
Written by M60 GSM Alarm Dialer
-
CTR Channel to Roster Software Upgrade
On a Standard M30 on when dialing it will select the Duty Roster set by the User (1,2 or 3). The current Duty Roster selected is shown on the top right of the LCD display (e.g. R1, R2, R3).
 CTR Channel to Roster Software Upgrade
The Channel to Roster software works differently. When an alarm becomes active, instead of the M30 dialling out on one of the Duty Rosters, the M30 will automatically select a Roster linked to that alarm channel.
So for Example;
If Channel 1 is activated it will dial Roster 1.
If Channel 5 is activated it will dial Roster 5.
If Channel 10 is activated it will dial Roster 10 etc.
This software upgrade is great for when you need to communicate different alarms to different people for example the fire brigade for the fire alarm and the maintenance department for the Air Conditioning in the server room.
This new feature is available either as an option on a new M30 or as a simple software upgrade on a current machine.
For more information and pricing on the C2R Software Upgrade please contact us
Written by M60 GSM Alarm Dialer
-
Remote Alarm Monitoring SMS
You can have the most advanced alarm system in the world, but like the proverbial tree in the forest, if no one hears it, not only was the system a waste of money but you have probably lost whatever it was monitoring.
Remote Alarm Monitoring with SMS That is why our M30 Alarm Dialer is specifically designed to Remotely Monitor Alarms on unmanned or critical industrial / commercial sites. It comes with all the types of feature you would expect from an industrial unit, including; 4-56 separate inputs, GSM & PSTN communication, industrial components, integrated battery backup and an IP56 enclosure. – Check out more features at the bottom of this post.
The M30 Alarm dialer can even be installed in locations without a physical phone line by using its GSM voice and SMS options.
The SMS option allows you can choose the type of message (SMS / Speech message) each alarm recipient will get via the easy to use LCD and menu system. E.g. If you wanted you could set it up so that the first person gets a SMS, the second a voice, the third a SMS etc.
Each input/channel on the M30 has its own user definable message SMS and speech message so instead of a generic “channel 1 alarm” you will receive a more useful “High Temperature in building 181” each machine also has a unit identifier message (e.g. “This is the Aberdeen water treatment plant”) to enable you to easily disting uish where the alarm message has come from.
Below are some of the features available on the M30;
- 4,8,16 and 56 individual inputs/ channels.
- Individual user recordable speech and or SMS messages for each input.
- Voice, SMS, Pager alarm messages
- PSTN and or GSM phone network connection.
- Remote 247 Interrogation from any phone.
- Integrated Mains Failure detection.
- 24 Hour battery Backup
- Fully Menu and Keypad driven
- IP56 Industrial enclosure.
Because the M30 is designed and built by ourselves in the UK if there is a special function you need for your application then we will normally be happy to create it for you.
The above list is only a small selection of the M30 features, for more comprehensive information please contact us or visit the standard or optional features pages.
Written by M60 GSM Alarm Dialer
-
GSM Alarm Dialler with Voice and SMS
 The M30 GSM Alarm Dialler is an industrial / commercial unit designed for operating in harsh environments. The M30 comes with all the features you would expect from an industrial unit including; 4 to 56 independent inputs each with their own user recordable speech or SMS message and integrated 24+ hour battery backup to name a few – see the standard features page for a full list.
Speech & SMS
The M30 Dialler now supports both Speech and SMS alarm messages. This can be individually configured for each Dialout. E.g. Dialout 1 to send a speech message to a land line, Dialout 2 to send a speech message to a mobile and Dialout 3 to send an SMS to a mobile.
GSM & PSTN
Unlike all other GSM Alarm diallers the M30 also has a PSTN connection, meaning if you wish, you can setup your unit to use the GSM network as a backup connection. I.e. The M30 will monitor your PSTN land line; if it fails or is cut it will automatically switch to the GSM network.
Below is a small subsection of the features that are available on the M30;
- 4,8,16 & 56 Individual Alarm Inputs.
- Individual Speech Messages for each input.
- Individual SMS Messages for each input.
- PSTN & GSM Options.
- Internal Mains Failure Alarm Sensor.
- 24+ Hour Internal Battery Backup.
- Fully Menu and Keypad Driven.
- IP56 Industrial Rated Enclosure.
If you would like more information or help on the features of the M30 please visit the standard or optional features pages or contact us directly.
The M30 is designed and built by us in the UK so if there are any special features you require for your application, we will normally be happy to create them for you.
If you have any questions or would like pricing please contact us.
Written by M60 GSM Alarm Dialer
-
Unmanned Site Alarm System
Having an unmanned site raises all sorts of questions about how you protect the sites security, the monitoring of any running equipment or processes to the welfare and safety of people or livestock.
Most of those questions can be fixed by installing various types of monitoring and or alarm systems.
Of course you can have the most advanced alarm system on the planet, monitoring every aspect of your unmanned site, with the loudest bells and strobes. But like the proverbial tree in the forest if there is no one around to hear and respond to the alarm you might as well just have an empty box on the wall.
This is where the M30 Unmanned Site Alarm Dialler comes in – The M30 connects to your current alarm system or you can wire in all your sensors and monitoring equipment direct to the M30. When the M30 receives an alarm signal it will automatically communicate this to the preprogrammed emergency contact list to inform the current on call personal that there is a problem on site.
The M30 can connect either to a local PSTN landline or to the GSM mobile phone networks; depending on what you have setup the M30 can send user recordable real speech alarm messages, SMS text messages or data to pagers.
If you worried about your landline failing or being deliberately tampered with, the M30 can monitor the connected PSTN land line, if this fails or is cut the M30 will automatically switch across to the GSM networks.
The M30 can also trigger an onsite alarm siren or strobe if you wish.
Below are some of the features available on the M30;
- 4,8,16 and 56 individual inputs/ channels.
- Individual user recordable speech and or SMS messages for each input.
- Voice, SMS, Pager alarm messages
- PSTN and or GSM phone network connection.
- Remote 247 Interrogation.
- Integrated Mains Failure detection.
- 24 Hour battery Backup
- Fully Menu and Keypad driven
- IP56 Industrial enclosure.
Because the M30 is designed and built by ourselves in the UK if there is a special function you need for your application then we will normally be happy to create it for you.
The above list is only a small selection of the M30 features, for more comprehensive information please contact us or visit the standard or optional features pages.
Written by M60 GSM Alarm Dialer
-
SMS Dialler
The Packs Infotel M30 SMS Dialler is a purpose built and designed machine for the types of harsh environments typically found in industrial and commercial applications.
THe M30 comes with 4,8,16 or 56 individual inputs as well as all the standard features you would expect from an industrial SMS Dialler including 24 hour battery backup.
The M30 is used all over the world in a diverse collection of applications such as Pharmaceutical, Power Generation, Security, Cold Storage, Oil / Gas Refineries, Building Management, Food production, Industrial Process Monitoring as well as the protection of humans and livestock.
SMS Text Messages
Each individual input of the M30 from 4 to 56 inputs has its own SMS message that is user configurable to about 25 ASCII characters plus each M30 has a station identification, this gives you an easy way to identify from which machine the SMS arrived.
When the M30 goes into alarm and sends the SMS messages to the predefined contact list the end user will receive an individual text message for each input/channel that is in alarm. So for instance if inputs/channels 1, 2, 3 and 4 were active the recipient would get four SMS messages.
SMS and or Real Speech Messages over PSTN or GSM networks.
The M30 is unique as it allows you the flexibility of not just sending SMS messages but voice messages as well.
With the M30 you can also send user recordable real speech voice messages over a connected PSTN land line connection or with an optional module send them over the GSM networks as well.
The SMS Dialler version of the M30 comes with the same standard features such as
- 4, 8, 16 or 56 independent alarm inputs.
- 3 separate Rosters (dial out lists).
- SMS and or Real Speech Messages over PSTN or GSM networks.
- Integrated battery backup.
- Integrated Mains Failure.
- Integrated Alarm output.
- Fully Menu and keypad driven.
- Industry standard IP56 enclosure.
The above list is not definitive, also as the M30 is designed and built by ourselves in the UK if there is a feature or function you need for your particular applications then please let us know as we can normally create it for you.
For more information or pricing on our M30 Auto Dialer please contact us or visit the SMS Dialler page on our site.
There is also a now a dedicated SMS section on our Blog.
Written by M60 GSM Alarm Dialer
-
SMS Text Message Feature
As of the winter of 2012/13 we have added another new feature to our M30 Alarm Dialler, the ability to send SMS messages in addition to the standard voice messages.
Each input/channel on the M30 can be configured with a user defined text message of around 25 ASCII characters – so instead of a recipient getting a useless “channel 1” alarm they can receive a useful “Mains Failure Boiler one” message.
This feature is in addition to the standard voice message option so you can still setup and send user recordable voice messages over the PSTN networks or over the GSM networks with the GSM converter.
Setup
Setting up your M30 is very simple; while entering your alarm contacts phone numbers you can select whether the recipient should get a SMS or a voice message.
The station identification is a maximum of 31 ASCII Characters.
All inputs can have an individual identifying text message of up to 25 ASCII characters.
Operation
When the M30 detects an active alarm/s it will send an individual SMS message for each active input to the predefined recipients. E.g. if 4 inputs are active then the on call engineer would get 4 SMS’s.
Message Example
Each SMS message is created from the M30’s Station ID (in <> brackets) and the inputs individual message and then followed by an *End of Message*.
E.g. If channel 1 is in alarm the M30 will send a text message as follows:
<Packs Infotel Office> Channel 1 Alarm Condition *End of Message*
or
<Sunningdale Landfill> Mains Failure Boiler one *End of Message*
For more information of the SMS upgrade visit the SMS Feature page or the SMS section on our Blog.
Written by M60 GSM Alarm Dialer
- c
- Compose new post
- j
- Next post/Next comment
- k
- Previous post/Previous comment
- r
- Reply
- e
- Edit
- o
- Show/Hide comments
- t
- Go to top
- l
- Go to login
- h
- Show/Hide help
- shift + esc
- Cancel
|
