New V50 software released for the M30 Alarm Dialer 

New V50 software released for the M30 Alarm Dialer

The new V50 software version has many new features and improvements, but the main changes are listed below.

New V50 software released for the M30 Alarm Dialer

New V50 software released for the M30 Alarm Dialer

Keypad

The M30 will now automatically progress to the next slot after a phone number has been added or edited.

The only exception is if it is already at the last slot in that roster/group.

Delays

All Dial out delays on the M30 can now be skipped over/though by simply pressing the “ESC” key.

This includes the Input delay, Inter-dial out delay and the Extended pause delay.

Number Skip Dial out Feature

The M30 now gives you the ability to manually select the number to be dialed from the currently selected roster.

For example during your weekly tests you don’t want to disturb the person in Dial out 2 as they are on holiday, with this feature you can just skip over them and jump straight Dial out 3.

When “TEL” appears on the display press the “ESC” key and you will hear a small beep. You can now use the down arrow to cycle though all the Dial out slots in the currently selected roster. (Every time you press the down arrow you will see the Dial out slot number change.)

If you go too far just keep pressing the down arrow, and the M30 will loop around.

When you are happy press the “ESC” key again and the M30 will carry on from the chosen number.

 

For more information and pricing on the V50 Software Upgrade please contact us

Related Articles:

Written by